Hydrogen Peroxide Low Temperature Plasma Sterilizer (Cassette Type)

Description

● Low temperature  sterilization  process at < 55 C (131° F)

● Uses vaporized hydrogen peroxide for the terminal sterilization of packaged, resuseable medical devices

● No secondary means of reducing hydrogen peroxide residual.

● Returns to atmospheric pressure by use of HEPA filtered room air.

● Releases only water vapor and oxygen (no drain required). No toxic residues.

● Siemens PLC control with 7” display of cycle phases and parameters.

● Integrated thermal printer

● USB port for processing data download .

● Easy to install without civil / plumbing work.

Specification

● Power supply :AC 220V 50 Hz or AC 110V 60 Hz , Standard plug . without the need of extra civil work

● Automatic lifting door with movable casters

● Sterilization room material : 5052 Aluminum alloy

● Uses 60% H₂O₂ solution as the sterilization agent

● Rapid Mode & Strengthen Mode; short cycle 35 minutes , long cyle 55 minutes; A cycle for all device

● Working temperature during 45–55°C

● Have memory storage for at least 500 sterilization cycles

● Suitable for sterilization of metal & non-metal medical devices like rigid endoscopes, metal &plastic lumen items , heat & moisture sensitive instruments etc

● Siemens PLC ,touch screen control The process is fully automatic;

● Built-in thermal printer , real-time print out sterilization status . USB port available for historical data download .

● Displays for chamber pressure and temperature ,processing phases and alarm errors .

● Vacuum pump to remove air and moisture from the chamber , RF generator produce plasma in 50Pa vacuum condition .

● Audible and visual alarm for : Temperature , Pressure,Vacuum condition ,self-diagnostic capability for troubleshooting.

● The sterilizer door cannot be opened if either electrical power or air pressure is lost during sterilizer operation.

Capacity list